The 400 Watt Pedal-A-Watt allows you to drop your own bicycle into the stand, secure it in under 10 seconds, pedal and create up to 400 watts.
The Pedal-A-Watt includes the bicycle stand, generator, blocking diode, adjustment knob and instructions. The Pedal-A-Watt is built to commercial grade with off the shelf components to reduce waste and carbon footprint. The stand is designed to work best with 26 or 27 inch wheels but will work with all wheels greater than 20 inches. Weighs 28 lbs.
The Pedal-A-Watt comes with a Lifetime Warranty and a Lifetime Guarantee. If you aren't happy with the Pedal-A-Watt for any reason, simply return it for a full, no questions asked refund. Should your unit break we'll replace the defective part or the entire stand.
Most Common Configurations:
If you want a package where you store electricity that you generate and then can plug appliances into an outlet like you have on the wall in your home please look at the Easy Pedal-A-Watt Package.
If you want to charge/power mobile devices that plug into a micro USB cable or female cigarette lighter plug simply order above the Pedal-A-watt Stand with the following accessories: 1) 12 foot cable with male cigarette lighter plug 2) 12 vdc regulator and 3) USB Port. This configuration will charge/power mobile devices as you pedal. If you also need to store the electricity you create while pedaling add the PowerPak.
Explanation of Accessories:
The 12 foot cable with male cigarette lighter plug will plug directly into the PowerPak for charging.
The 12 vdc voltage regulator accessory provides a level 14.2 volt output and converts any "excess" input voltage into useable output amperage. This is perfect for 12 volt battery charging. This is the ultimate 12 vdc regulator / charge controller which is custom made and beats everything else on the market. Don't settle for cheap relay switching type regulators that you may see used with pedal generators as they are very inefficient and you'll be wasting a lot of your energy.
The PowerPak combines a 600 watt-hour battery and a 600 watt inverter in a nice, neat package that is easy to carry and store. The battery stores the electricity created by the Pedal-A-Watt and the inverter provides power at an out let, like on the wall in your home, that allows you to plug your appliances and power strips in.
The LED light strip is a very bright, low power consumption light that is excellent for demonstrations or for emergency lighting needs. Three minutes of pedaling on the Pedal-A-Watt into the PowerPak will provide two full day's worth of continuous light via the LED light strip. The LED light strip will light a 400 square ft area.
The Solar Panel options allow you to capture the sun's energy to store additional electricity in the PowerPak or your 12 volt battery.
The USB Port provides a port like the one on your PC - plug any USB device in and power / charge it. The USB Port option requires the 12 vdc regulator.
The Grid Intertie Inverter allows you to feed the electricity you create from the Pedal-A-Watt into your house's electrical system. Simply plug the grid intertie inverter into a wall outlet in your home. Please check with your locality as an electrician may need to oversee the installation.
Ships within 48 hours within the US and outside the US by United Postal Priority Mail Service. Please CONTACT US if you have a deadline! USPS Priority Mail takes 2 to 5 business days within the US and 6 to 10 days outside of the US.